GTS OWNERS CLUB

dillonm · Joined: 18 May 2007 Posts: 15

Well my standard exhaust is off, rounded one of the torx bolts so had to drill it and use bolt extractors. Got there eventually.

Know time to fit the new stainless pipe, couple of questions for the experts on here

Does the lamba sensor just screw of the manifold ?

Is it a 20ml spanner I need ?

buddyphil · Posted: Sun Jul 08, 2007 7:26 pm Post subject:

lamba sensor just unscrews from the downpipe
i used a big adjustable spanner with the downpipe held
in a workmate

dillonm · Joined: 18 May 2007 Posts: 15

thanks, I'm concerned it may be damaged under pressure, i'll go easy with it.

When I reconnect should I apply anything into the threads to help seal it, or just screw it in

buddyphil · Posted: Sun Jul 08, 2007 7:31 pm Post subject:

i just made sure the sealing face was clean
and screwed it in
what pipe ya using?

dillonm · Joined: 18 May 2007 Posts: 15

scorpion, I've read some negative comments about it, but my scoot is only used for occasional rallies & not for work so i'm hoping it'll be ok.

buddyphil · Posted: Sun Jul 08, 2007 7:43 pm Post subject:

just be carefull tirhtening the sensor into the
scorpian downpipe its very thin steel

dillonm · Joined: 18 May 2007 Posts: 15

thanks again